Forge Motorsport

Product Description *Please note - This will not fit Audi S3 facelift 2017 onwards* After over a year in our R&D department finalising the des...

Product Description THIS PRODUCT DOES NOT FIT LEFT HAND DRIVE VEHICLES The Forge Motorsport high flow intake hose for the MQB platform 2.0 engines,...

Product Description A Big Brake kit with 6 pot calipers and 330x32mm ventilated discs. The discs are drilled and grooved to remove braking resid...

These wheel spacers are hub-centric These CNC machined precision alloy wheel spacers are 20mm thick with a dual 5 stud bolt pattern for both 100 an...

Product Description With our extensive development, and the continuing review of our intercooler for the TTRS, we were very eager to use our wealt...

Product Description A Rear Big Brake kit with 4pot calipers and 330 x 28mm ventilated discs. The discs are grooved to remove braking residuals and...

Product Description A Big Brake kit with 6 pot calipers and 356x32mm ventilated discs. The discs are grooved to remove braking residuals and maint...

Product Description A Big Brake kit with 6 pot calipers and 356 x 32mm ventilated discs. The discs are grooved to remove braking residuals and mai...

Product Description A Big Brake kit with 6 pot calipers and 330 x 32mm ventilated discs. The discs are grooved to remove braking residuals and ma...

Product Description If your car is fitted with adaptive cruise control, we can additionally supply you with a billet bracket and fixings to enable...

Product Description This front mounting intercooler kit has been designed as an upgrade for the Audi S4 B9 and fits the Audi A4 B9. Offering a hug...

Product Description For the new 2.0 Litre FSIT engines, there is one sure way to improve on the charge air cooling by using the Forge "Twintercoole...

Product Description The Audi S1 packs the large 2.0 TSI engine from the Golf GTI into a small chassis, so some things are bound to be compromised,...

Product Description This uprated intercooler replaces the original front mounted intercooler. It can either be used on its own or in combination w...

Product Description For the new 2.0L FSIT engines there is one sure way to improve on the charge air cooling by using the Forge "Twintercooler." T...

Product Description Front Replacement Brake discs and bolts Only for use with existing Bell Hats to fit Forge Motorsport Brake kits. 2x 356 x 32 ...

Product Description This fits vehicles with a Charcoal Filter Installed. Excess crankcase pressure is vented from the crankcase through the PCV sy...

Product Description This valve kit is an evolution of the FMARSDV dump valve we market for the 8P chassis RS3. It was developed for those who have...

Product Description This valve kit was developed for those who have tuned, or plan to tune, their Audi TTRS or Audi RS3 in excess of 450hp, as it ...

Product Description A high flow vacuum operated single piston valve for Audi, VW, and SEAT (VAG) 2.0 litre Petrol engines with the K03 turbo (the ...

Product Description FMIND16 – Golf Mk5 2.0 GTi & ED30 and Audi S3 2.0 The new Forge Motorsport single intake for golf Mk5 GTi, ED30 and Audi S3...

Product Description Excess crankcase pressure is vented from the crankcase through the PCV system, where it is drawn into the intake manifold and ...

Product Description Following on from the success of our billet catch can kit for the Golf Mk5 and Golf Mk6, we are pleased to present another of o...

Product Description After looking at the problems associated with the lack of adjustment on the 4 wheel drive vehicles, especially noticeable when...